VertiBOT

Created by MAF, source
  3D view
3D Compare
mirror
created 18/11/13 08:48


Download shape

VertiBOT is an educational project to investigate and understand sensor fusion using kalman and complementary filter algorithm and PID control in an unstable system.

VertiBOT is an inverted pendulum platform that remains balanced by means of two tiny motors, located in the bottom of the structure. The battery is attached in the top of the main body, while the electronics board is located near the rotation axis.
The feedback signal is provided by an IMU 6Dof composed by an accelerometer and a gyro. One ATmega 328 microcontroller execute the main loop every 10 milliseconds. A wireless communication over bluetooth is used to tune and check the signal response in a Graphical User Interface software.

Video: youtu.be/A5KtT4GVpx8
Useful info, schematic and code available: wp.me/p22sj0-fT

User Prints

If you printed this shape, share it!

I printed this!

Instructions

  • Microcontroller ATmega 328 16MHz (Arduino nano).
    • IMU 6Dof: accelerometer y gyroscope.ADXL345/ ITG3200
    • Motor Driver Pololu Qik2sv1.
    • Bluetooth modem for wireless communication.
    • Potentiometer for PID tuning parameters
    • Buttons for different tasks: algorithm change, calibration offsets ..
    • Voltage regulator (MCP1700) and logic converter .
    • Pololu MicroMetal Motors (50:1)
    • Pololu Wheels 90x10mm

Tags

Comments

You must be logged in to comment, log in now

Latest Changes

Nov 18, 2013

  • Add file pendulum.stl
    By mirror at 08:48
  • Add file pendulum2.stl
    By mirror at 08:48
network map more

Forks

Be the first one to fork this shape Fork

License


VertiBOT by mirror is licensed under the Creative Commons - Attribution license.

Print Tag

If you printed this shape, please give your attribution by print this tag

Shape Tag
  1. Welcome Tutorial - The shape page

    This is a shape page, a shape can contain one or more STL files as well as extra instructions helper files..
    Press Next to continue.

  2. This is the shape gallery. Like in many sites you can see a 3D view of this shape by clicking the "3D view" button. This button appears when an image is linked to an STL file.

  3. In case you missed it, this download button would let you download the shape.

  4. Here comes the magic of ShapeDo, lets start by forking this shape.
    Forking a shape creates a full copy of the shape in your account, one which you an edit and improve on.
    Try forking this shape!

  1. Welcome Tutorial - The shape page

    This is a shape page, a shape can contain one or more STL files as well as extra instructions helper files..
    Press Next to continue.

  2. This is the shape gallery. Like in many sites you can see a 3D view of this shape by clicking the "3D view" button. This button appears when an image is linked to an STL file.

  3. In case you missed it, this download button would let you download the shape.

  4. Here comes the magic of ShapeDo, lets start by forking this shape.
    Forking a shape creates a full copy of the shape in your account, one which you an edit and improve on.

  5. Note there are extra details calculated for the shape, such as volume and file size, useful for when you want to print.

  6. Shapes can have many revisions, here you can see the version count with the latest first. By clicking on the version you can see live what has been changed in the 3D viewer or download older versions.

  7. This box will show you the history of changes made on this shape.

  8. You can see a visual representation of the history by clicking on the "network map" link, the "network map" shows the entire fork and shape history, its a powerful tool finding the exact version you want, and seeking who has the latest changes. You can also view it by clicking on the 'forks' message at the top of the page

  9. This box will show the users who forked this shape. Forks can take shapes in unusual directions.

  10. Don't forget to upload your shapes and thanks for participating our tour. We can't wait to see what you will create!

  11. Your feedback is important, please take a minute to make us get better.

  1. Congratulations

    You have created your first fork, good job!
    You made your first important step.

    Lets continue our tour...

  2. This shape is yours, you can edit and update it in any way you want.

    You can get new changes from other users that forked the original shape by pulling from them. Using the arrow on the right of the edit button opens the pull action.

    When you make changes and want to contribute back to the origin, just use the merge request to create a request to the original author. They will get an e-mail that their shape has a request, they can comment on it in case a change needs to be made.

  3. You can see here where the shape was forked from and who will get the request.

  4. Note there are extra details calculated for the shape, such as volume and file size, useful for when you want to print.

  5. Shapes can have many revisions, here you can see the version count with the latest first. By clicking on the version you can see live what has been changed in the 3D viewer or download older versions.

  6. This box will show you the history of changes made on this shape.

  7. You can see a visual representation of the history by clicking on the "network map" link, the "network map" shows the entire fork and shape history, its a powerful tool finding the exact version you want, and seeking who has the latest changes. You can also view it by clicking on the 'forks' message at the top of the page

  8. This box will show the users who forked this shape. Forks can take shapes in unusual directions.

  9. Don't forget to upload your shapes and thanks for participating our tour. We can't wait to see what you will create!

  10. Your feedback is important, please take a minute to make us get better.